6 Best Non Slip Grips For Metal Rulers Worth Using
Stop your ruler from sliding with these 6 best non-slip grips for metal rulers. Improve your precision and workspace safety by reading our expert guide today.
Precision in fiber arts begins long before the first stitch is cast. Cutting fabric for quilt linings, blocking lace shawls to exact measurements, or squaring up finished pieces requires a steady, unyielding metal ruler. When a ruler slips mid-cut, the result is often ruined fabric or, worse, a nicked fingertip. Securing a reliable grip is the most effective way to elevate the quality of project prep and ensure studio safety.
Omnigrip InvisiGrip: Best for Total Coverage
InvisiGrip provides a translucent, non-slip film that covers the entire underside of a ruler. Because it clings to the surface without the need for adhesives, it maintains total visibility through the metal or plastic while providing a high-friction barrier.
For knitters who frequently work with slippery, fine-gauge silks or rayons, this stability is essential. A shifting ruler can easily turn a precise cut into a jagged, unusable edge. By covering the whole surface, the ruler becomes effectively locked into place against the fabric.
The tradeoff here is that the film can collect lint and stray threads over time, potentially losing its tackiness. A quick wipe with a damp cloth usually restores its grip, but it requires regular maintenance.
Dritz See-Thru Grips: Top Pick for Small Rulers
Dritz See-Thru Grips are essentially small, textured adhesive discs designed for smaller scale precision. These are ideal for those compact 6-inch rulers used to measure gauge or check stitch density during a project.
Small rulers are notorious for sliding when pressed down at only one end. These grips provide a concentrated point of resistance that keeps the tool flat against the mat. They are discrete and do not add unnecessary bulk to a toolkit.
Since they use a mild adhesive, they can eventually lose their stickiness or peel at the edges. They are best suited for rulers that live on the sewing table rather than ones tossed loosely into a project bag.
TrueGrips Adhesive Rings: Best for Custom Placement
TrueGrips consist of circular, adhesive-backed rings that can be placed exactly where the fingers apply the most pressure. By positioning these rings at the corners or center of a ruler, the pressure is redistributed to maximize stability.
This flexibility is a major advantage for ergonomic control. When measuring the length of a sweater sleeve or the width of a knitted panel, you often need to hold the ruler with one hand while pinning with the other. Strategically placed rings allow for a one-handed hold that doesn’t slip.
Be aware that these rings may interfere with reading the markings if placed carelessly. Take a moment to align them near the edges of the ruler, clear of the primary measurement scale.
Get a Grip Strips: The Most Versatile Option
Get a Grip Strips are elongated, textured adhesive strips that run the length of a ruler. They provide a continuous line of friction that is particularly helpful for long, straight cuts across a width of backing fabric or batting.
These strips are durable and resist the wear and tear of frequent handling. For makers who move between heavy woolens and delicate cottons, the consistent resistance offered by a full-length strip is highly reliable.
If you prefer a lighter touch, you can easily trim these strips to shorter lengths. They provide a balance between the total coverage of a film and the concentrated nature of individual dots.
Cutters Mate Ruler Handle: Best for Hand Safety
The Cutters Mate Ruler Handle is a mechanical solution that attaches via suction to any smooth-surfaced ruler. It creates a physical handle, removing the need to press your fingers directly onto the flat surface of the metal.
This is a game-changer for knitters dealing with joint stiffness or fatigue. Instead of flattening your hand against a cold, hard ruler, you grasp an ergonomic handle, which keeps your fingers elevated and away from the cutting blade.
The primary limitation is the footprint; it takes up space on the ruler that might otherwise be used for visibility. It is a heavier option, best reserved for large-scale cutting tasks rather than quick measurements.
Grip-It Non Slip Spray: For All Your Tools
Grip-It spray offers a liquid, aerosolized solution that dries into a tacky, rubberized coating. It is the most adaptable option, as it can be applied to the entire back of a metal ruler or just the sections that touch the cutting mat.
This is an excellent choice for those who dislike the aesthetic of stickers or the bulk of rubber grips. It creates a seamless, thin layer of friction that does not interfere with the ruler’s ability to lie perfectly flat against your material.
The drawback is permanence; once applied, it is difficult to remove without solvent. Apply it in a well-ventilated area and ensure an even coat to prevent uneven wobbling during use.
How to Choose the Right Grip for Your Ruler
Choosing the right grip depends heavily on your specific workflow. If you are doing high-volume cutting for quilts or garment construction, total coverage or long strips are superior.
Consider the surface you are working on as well. Self-healing mats have a natural texture, but metal-on-mat contact is still inherently slippery. The grip you choose should complement your mat, not fight against it.
- Frequency of use: Frequent use demands durable, washable materials.
- Ergonomics: If you feel strain during prep, opt for handles over flat grips.
- Visibility: Ensure your chosen grip does not obscure the measurement markings you rely on.
Dots vs. Strips vs. Sprays: Which Grip Is Best?
Dots are best for precision work and small, handheld rulers where space is at a premium. Strips offer the most stability for long cuts and are generally easier to apply in a straight, centered line.
Sprays are the most customizable but require the most care during application. Each has a specific role, and there is no universal “best” product; it comes down to whether you prioritize quick application or total control.
Avoid overthinking the brand name. The most important factor is the coefficient of friction provided by the material and how well it adheres to the specific finish of your metal ruler.
Applying Grips: Tips for a Bubble-Free Finish
Preparation is the secret to a long-lasting grip. Before applying any adhesive, clean the surface of your metal ruler with rubbing alcohol to remove oils from your hands or residue from previous projects.
When applying strips or films, work from one end to the other, using a hard edge like a credit card to press out air bubbles as you go. Bubbles create uneven surfaces, which cause the ruler to rock or pivot under pressure.
Avoid stretching the adhesive materials during application. If they are stretched, they will eventually shrink back to their original size, causing the edges to curl and collect debris.
Why a Non-Slip Grip Is a Must-Have Safety Tool
A non-slip grip is not merely an accessory; it is a fundamental safety tool for any workshop. By eliminating the slide, you eliminate the instinctual urge to press down harder, which is often what causes hand cramps and fatigue.
When your ruler stays put, your focus remains entirely on the accuracy of your cut and the safety of your blade path. This confidence allows for better results, faster project prep, and a much safer environment for your hands and tools.
Investing in a proper grip is a small step that yields dividends in both the quality of your finished fiber projects and the comfort of your practice. Never underestimate the impact of a stable base on your overall output.
A secure, non-slip ruler is the hallmark of a prepared maker. By choosing the right grip for your specific needs, you eliminate one of the most common frustrations in project construction, leaving you more time to focus on the intricate details of your craft.
